Product Category
10⁵–10⁸ Ω/sq · Ra 0.4 · ISO 5 · 4-Probe Cert · Zero-Particle
EAF / 001 — 010
4-Probe Verified
ESD Anti-Static Fixtures
Custom CNC machined ESD anti-static fixtures and carriers — ESD PEEK or conductive Al, surface resistivity 10⁵–10⁸ Ω/sq verified by 4-probe ASTM D257, contact surface Ra 0.4 µm, ISO Class 5 cleanroom compatible. For wafer carriers, chip handling trays, and semiconductor assembly fixtures.
10⁵–10⁸Ω/sq
ESD Range
Ra 0.4µm
Contact Surface
ISO 5
Cleanroom
PART DWG · EAF-001 WAFER CARRIER · ESD PEEK · 4-PROBE 10⁷ Ω/sq
ISO 9001 · ASTM D257 · CLEANROOM
4-Probe Array
Ground Strap M3
Wafer · Chip Tray · FOUP · Handler · PCB Assembly
Applications
ESD PEEK · Cond. Al · Statex · ESD POM
Materials
48hr Quote · 7-Day Proto · MOQ 1
Service
10⁵–10⁸
Surface Resistivity Ω/sq
ESD protective range
ESD protective range
Ra 0.4µm
Contact Surface
device-safe finish
device-safe finish
ISO 5
Cleanroom
compatibility
compatibility
7 Days
Fastest Delivery
prototype orders
prototype orders
Machining Challenges
ESD Anti-Static Fixture Challenges
An ESD fixture must dissipate static charge reliably while never generating particles or contaminating the device — requirements that conflict with each other if the wrong material or surface treatment is chosen.
⚡
ESD Material Consistency
ESD resistivity must be uniform throughout the material (not just a coating) for long-term reliability. Carbon-loaded ESD PEEK and conductive anodize on Al both provide bulk ESD properties. HXC verifies resistivity by 4-probe measurement before and after machining.
🧼
Zero Particle Generation
ESD fixtures in cleanrooms must not shed carbon particles from ESD-loaded materials. HXC uses vacuum-compatible ESD PEEK grades and verifies particle cleanliness by IPA rinse + particle count after ultrasonic cleaning.
🔬
Contact Surface Consistency
Device contact surfaces must be Ra 0.4 µm or better with no sharp features. All ESD fixture contact surfaces are polished and verified by profilometer — no exceptions.
Our Work
Request Similar Part →
ESD Anti-Static Fixtures We've Made
Real CNC machined semiconductor components — cleaned, inspected, and cleanroom-packaged.
ESD PEEK · WaferESD Wafer Carrier Fixture
10⁷Ω/sq · Ra 0.4µm · 15 pcs
Cond. Al · ChipESD Chip Handling Tray
Conductive ano · 20 pcs
ESD PEEK · TransportWafer Transport ESD Tray
Cleanroom · 10 pcs
ESD PEEK · AssemblyPCB Assembly ESD Fixture
Ra 0.4µm · 25 pcs
Cond. Al · FOUPFOUP Gripper ESD Fingers
10⁶Ω/sq · 30 pcs
ESD PEEK · CustomCustom ESD Handling Fixture
Device-specific · 8 pcs
ESD PEEK · CarrierDevice Carrier ESD Insert
Matched set · 12 pcs
ESD PEEK · BatchESD Fixtures — Batch
50 pcs · Resistivity cert
Capabilities & Tolerances
What We Can Deliver
Typical specifications — confirm exact requirements at enquiry.
| Surface resistivity | 10⁵–10⁸ Ω/sq (ESD protective) |
| Contact surface Ra | 0.4 µm |
| Material options | ESD PEEK, conductive ano Al |
| Particle cleanliness | IPA rinse + particle count |
| Volume resistivity | 10⁷–10⁹ Ω·cm (ESD PEEK) |
| Cleanroom class | ISO Class 5 compatible |
| Materials | ESD PEEK, conductive Al, Statex |
| Resistivity test | 4-probe ASTM D257, every batch |
| Cleaning | IPA ultrasonic + cleanroom pack |
| Lead time (proto) | 7–10 days |
| Lead time (batch) | 12–18 days |
| Certificate | Resistivity + particle count |
How It Works
From Drawing to Cleanroom-Ready Part
Upload your drawing — DFM, machining, 4-probe resistivity test, cleaning, and cleanroom packaging within agreed lead time.
01
Upload Drawing
STEP, DXF, PDF. Include material, tolerance, and cleanliness class.
02
DFM & Quote
Free DFM — material selection, contact surface, ground strap. Quote in 48 h.
03
Machine & Test
CNC, 4-probe resistivity verify, ultrasonic clean, particle count.
04
Ship Worldwide
Resistivity + particle count cert enclosed. DHL / FedEx / sea freight.
Reviews
Trusted by Semiconductor Equipment Engineers
★★★★★
"Surface cleanliness and packaging met our cleanroom incoming inspection requirements immediately. Dimensional report matched our CMM check perfectly."
LW
Li Wei
Process Equipment Engineer · Taiwan
★★★★★
"HXC understood the ESD resistivity requirements for our wafer carriers without lengthy explanation. 4-probe certs were attached to every batch. Lead time was exactly as quoted."
SL
Sophie L.
Equipment Design Engineer · South Korea
★★★★★
"We've sourced ESD fixtures and wafer handling parts from HXC for two years. Cleanliness, dimensional accuracy, and batch consistency are excellent."
JT
James T.
Senior Procurement · USA
FAQ
ESD Anti-Static Fixtures — FAQ
Engineering and procurement questions answered by our semiconductor components team.
ESD PEEK (carbon-loaded, 10⁷–10⁹ Ω·cm volume resistivity): chemical-resistant, cleanroom-compatible, temperature-stable. Conductive anodized Al: surface resistivity 10⁵–10⁶ Ω/sq, lightweight, rigid. Statex conductive PEEK: surface resistivity 10⁵–10⁶ Ω/sq for higher static dissipation. HXC stocks multiple ESD grades — specify your target resistivity class and we recommend the optimal material.
Yes — HXC's ESD fixtures use vacuum-compatible ESD PEEK grades with zero detectable outgassing at room temperature. Particle cleanliness: IPA ultrasonic cleaning followed by particle count (SEMATECH procedure). Packaging: ISO Class 5 cleanroom bag with N₂ purge. ESD material certification and particle count report provided.
ESD resistivity is measured by 4-probe method (ASTM D257) before and after machining. Any fixture where surface resistivity falls outside the 10⁵–10⁸ Ω/sq range after machining is rejected — this can occur if conductive surface layers are removed during machining. For ESD PEEK: bulk resistivity is uniform throughout the material so machining does not affect ESD properties.
All device contact surfaces: Ra 0.4 µm or better, chamfered edges (R ≥ 0.1 mm), zero burrs. For glass substrate or wafer edge contact: Ra 0.2 µm. For bare die contact: Ra 0.1 µm with PEEK material to minimise scratch risk. All contact surfaces verified by profilometer before shipment.
Yes — ESD fixtures include grounding strap attachment points (4-40 UNC or M3 threaded bosses with stainless contact area) as standard design features for static dissipative configurations. HXC also machines ESD bus rails and grounding bridges as integrated fixture features.
ESD PEEK is sourced from the same qualified supplier and lot-qualified by 4-probe test before use. For conductive anodize: the anodize bath parameters are controlled and a coupon from each batch is resistivity-tested. Batch-level resistivity certificates are provided with every production order.
Prototype: 7–10 days. Batch: 12–18 days. Custom device-specific fixtures: 8–14 days.
Get a Quote
Send Your Drawing.
Get a Quote.
Every enquiry includes a DFM review — tolerance feasibility, material confirmation, and process approach confirmed before production starts. MOQ 1 piece.
24hr
Quote Response
MOQ 1
Prototypes OK
ISO
9001:2015
📐
DFM Review on Every Enquiry
Tolerance feasibility, fixturing strategy, and material confirmation. Specific, actionable feedback — not generic pushback.
🎯
First Article Inspection — Standard
FAI report on every new run. Material certs and surface treatment certs included with every shipment.
🔄
Same Process: Prototype to Production
Process plan from your prototype applies to production batches. No re-qualification when you scale.
⚙
3 / 4 / 5-Axis CNC + Turning
Complex structural parts, shafts, housings, and transmission components. Metals and engineering plastics.
ISO 9001:2015
3/4/5-Axis Milling
CNC Turning
CMM Inspection
Global Delivery