Equipment & Manufacturing Floor
Our CNC
Equipment
Inventory
A vertically integrated production floor with 185+ CNC machines and a full inspection lab — from 5-axis simultaneous milling to Swiss-type turning, supported by CMM, 2D/2.5D/3D vision measurement, and salt-spray testing, all under one roof and managed by our ERP traceability system.
100+ CNC Machines
3 Shift · Lights-Out
15+ Inspection Systems
ERP Managed
Total Machines
185+ Units
Inspection Lab
CMM · 2D / 2.5D / 3D
Manufacturing Floor
185+ Machines, One Shop Floor
Our facility is organized into four production zones — high-volume turning, prototype & precision milling, multi-axis complex machining, and Swiss-type micro production — all supported by a dedicated inspection lab equipped with vision measurement, CMM, depth gauging, and environmental testing.
Total Equipment
185+
CNC machines + inspection systems
Production Zones
4
Milling · Turning · Swiss · QC
Operation Mode
3 Shifts
Lights-out for batch production
Precision Tolerance
±0.005mm
CMM verified on critical features
CNC Milling Centers
80Machines
5-Axis
×30
UNIT / 01
5-Axis Simultaneous Machining Centers
Full simultaneous 5-axis interpolation for complex freeform surfaces, multi-face structures, undercuts, and aerospace-grade parts. Eliminates re-fixturing error on complex geometry.
Quantity30 Units
Tolerance±0.005 mm
Travel800 × 600 × 500 mm
Use CaseAerospace · Medical · Mold
4-Axis
×10
UNIT / 02
4-Axis CNC Machining Centers
Vertical machining centers with a rotary 4th axis for indexed and continuous side-face machining. Ideal for cylindrical workpieces with side features, fewer setups, and shorter cycle times.
Quantity10 Units
Tolerance±0.01 mm
Travel1000 × 600 × 600 mm
Use CaseShafts · Manifolds · Housings
3-Axis
×40
UNIT / 03
3-Axis Vertical Machining Centers
Workhorse vertical CNC mills for flat surfaces, pockets, slots, drilled holes, and prismatic parts. The most efficient choice for standard geometry across all materials and volumes.
Quantity40 Units
Tolerance±0.01 mm
TravelUp to 2000 × 1000 mm
Use CasePlates · Brackets · Enclosures
CNC Lathes & Turning Centers
80Machines
Standard
×60
UNIT / 04
Standard CNC Lathes
High-throughput 2-axis CNC lathes for cylindrical, threaded, and turned parts in any volume. The foundation of our turning capacity — from short bushings to long shafts.
Quantity60 Units
Max ODØ 600 mm
Max Length1500 mm
Tolerance±0.01 mm
Live Tooling
×20
UNIT / 05
CNC Lathes with Live Tooling (C/Y Axis)
Multi-tasking turning centers with driven tools and C/Y axis capability. Mill cross-holes, flats, and milled features in a single setup — eliminating secondary operations.
Quantity20 Units
CapabilityTurn + Mill in One Setup
AxesC / Y · Sub-Spindle
Use CaseComplex Turned Parts
Heavy Duty
×5
UNIT / 06
Heavy-Duty CNC Lathes
Large-capacity lathes for shafts, rollers, flanges, and high-load structural turned components. Reinforced spindle and bed support for parts up to Ø600 × 3000 mm.
Quantity5 Units
Max ODØ 600 mm
Max Length3000 mm
Use CaseLong Shafts · Large Flanges
Swiss-Type Lathes
20Machines
5-Axis Swiss
×10
UNIT / 07
5-Axis Swiss-Type Lathes
Swiss-type sliding-headstock machines with 5-axis capability for complex micro parts. Ideal for medical implant components, surgical instruments, and miniaturized precision parts in tight production tolerances.
Quantity10 Units
DiameterØ 0.5 – 25 mm
L/D RatioUp to 100:1
Use CaseMedical · Watchmaking · Dental
6-Axis Swiss
×10
UNIT / 08
6-Axis Swiss-Type Lathes
Advanced 6-axis Swiss machines with main + sub-spindle synchronization, B-axis live tooling, and back-working capability. Highest level of single-setup complexity for high-volume precision parts.
Quantity10 Units
DiameterØ 0.5 – 32 mm
CapabilitySub-Spindle · B-Axis · Back-Work
Use CaseHigh-Volume Complex Parts
Swiss Type Capacity
20 Units
High-Volume Micro Precision Production
Continuous lights-out operation for shafts, pins, screws, dental implants, and watch components from Ø 0.5 mm upward. Single-setup completion with sub-spindle transfer.
Get Swiss Quote →185+
Total Machines
30
5-Axis Centers
85
CNC Lathes
±0.005mm
Best Tolerance
Quality Inspection Equipment
15+Systems
2D Vision Measurement System
Optical Profile Projector
Non-contact optical measurement for flat features, hole positions, and 2D profiles. CCD camera with image processing software for rapid dimensional verification on stamped, machined, and turned parts.
Resolution 0.001 mm
Travel 300 × 200 mm
CCD Optical
2.5D Vision Measurement System
Vision + Touch Probe Hybrid
Combines optical 2D measurement with a touch probe Z-axis sensor for measuring step heights, depths, and limited 3D features. Faster than full CMM for typical machined geometry verification.
XY Optical · Z Probe
Accuracy 0.003 mm
Travel 400 × 300 × 200 mm
3D Coordinate Measuring Machine
Full GD&T Verification
Touch-probe CMM for complete 3D dimensional inspection. Verifies GD&T callouts — true position, parallelism, perpendicularity, flatness, concentricity, and complex profile tolerances on every critical feature.
Accuracy 0.002 mm
Travel 700 × 500 × 400 mm
PC-DMIS Software
Digital Depth Measurement
Precision Depth Gauging
High-precision depth gauges and bore-depth measurement systems for blind holes, counterbores, steps, and shoulders. Direct digital readout traceable to international standards.
Resolution 0.001 mm
Range 0–300 mm
Mitutoyo Standard
Salt Spray Test Chamber
Corrosion Resistance Testing
Accelerated corrosion testing for surface-treated parts — anodized aluminum, electroplated steel, and passivated stainless. Validates coating performance per ASTM B117 and ISO 9227 standards.
ASTM B117
ISO 9227
NSS · CASS · AASS
Surface Roughness Testers
Ra / Rz / Rq Profilometry
Contact stylus profilometers for measuring surface roughness on machined, ground, and polished surfaces. Records Ra, Rz, Rq, and Rt values traceable to ISO standards.
Range 0.025–12.5 μm
ISO 4287 / 4288
Mitutoyo SJ-410
Equipment Summary
Complete Equipment Inventory
A complete breakdown of every category, machine type, and quantity on our production floor.
| Equipment Category | Type / Capability | Specification | Quantity |
|---|---|---|---|
| 5-Axis Mill | Simultaneous 5-axis machining centers | Tolerance ±0.005 mm | 30 Units |
| 4-Axis Mill | VMC with rotary 4th axis | Index & continuous milling | 10 Units |
| 3-Axis Mill | Vertical machining centers | Travel up to 2000 × 1000 mm | 40 Units |
| CNC Lathe | Standard 2-axis turning centers | Max Ø 600 × 1500 mm | 60 Units |
| CNC Lathe (Live) | Live tooling C/Y axis | Turn + mill in one setup | 20 Units |
| Heavy-Duty Lathe | Large-capacity turning | Up to Ø 600 × 3000 mm | 5 Units |
| Swiss Type (5-Axis) | Sliding-headstock micro lathe | Ø 0.5 – 25 mm | 10 Units |
| Swiss Type (6-Axis) | Sub-spindle & B-axis | Ø 0.5 – 32 mm | 10 Units |
| 3D CMM | Coordinate measuring machine | Accuracy 0.002 mm | 4 Units |
| 2D Vision | Optical profile projector | Resolution 0.001 mm | 3 Units |
| 2.5D Vision | Vision + touch probe hybrid | XY optical + Z probe | 2 Units |
| Depth Gauge | Digital depth measurement | Resolution 0.001 mm | 3 Units |
| Salt Spray Chamber | Corrosion testing | ASTM B117 / ISO 9227 | 1 Unit |
| Roughness Tester | Ra / Rz profilometry | 0.025 – 12.5 μm range | 2 Units |
| Hardness Tester | Rockwell & Vickers | HRC / HV verification | 2 Units |
| Roundness Tester | Cylindricity verification | Roundness 0.1 μm | 1 Unit |
Equipment Management
How We Keep Every Machine Production-Ready
Equipment is only valuable when it's calibrated, maintained, and operated by certified technicians. Here's how we manage 185+ machines to the same standard.
1
Daily Pre-Shift Inspection
Operators verify spindle warm-up, coolant levels, way lubrication, and tool offset zero on every machine before production begins.
2
Weekly Preventive Maintenance
Scheduled cleaning, lubrication, spindle alignment checks, and axis calibration verification logged per machine.
3
Annual Calibration & Audit
Third-party calibration on positioning accuracy, ballbar testing, and geometric verification per ISO 230 standards.
4
Inspection Lab Certification
CMM, vision systems, and gauges externally calibrated annually. Daily verification with calibrated reference blocks.
Get a Quote
Send Your Drawing.
Get a Quote.
Every enquiry includes a DFM review — tolerance feasibility, material confirmation, and process approach confirmed before production starts. MOQ 1 piece.
24hr
Quote Response
MOQ 1
Prototypes OK
ISO
9001:2015
📐
DFM Review on Every Enquiry
Tolerance feasibility, fixturing strategy, and material confirmation. Specific, actionable feedback — not generic pushback.
🎯
First Article Inspection — Standard
FAI report on every new run. Material certs and surface treatment certs included with every shipment.
🔄
Same Process: Prototype to Production
Process plan from your prototype applies to production batches. No re-qualification when you scale.
⚙
3 / 4 / 5-Axis CNC + Turning
Complex structural parts, shafts, housings, and transmission components. Metals and engineering plastics.
ISO 9001:2015
3/4/5-Axis Milling
CNC Turning
CMM Inspection
Global Delivery